Referanser
Dormer:E621M6
Rubix:6197846
EAN:7320760384947
Produktinformasjon : GJENGETAPP M6x1.00mm HSS BLANK - E621M6 - DORMER
HSS machine tap for metric Helicoil thread uncoated form C 40° spiral fluted 2xD blind holes for general use in steel <1200 N/mm². Stainless steel. Nickel alloys <900 N/mm² and aluminium alloys.
Bruksområder
• Structural steel, case-hardening steel (<200 HB <700 N/mm²)
• Carbon steel (<250 HB <850 N/mm²)
• Alloy steel (<250 HB <850 N/mm²)
• Alloy steel hardened and tempered (>250<350 HB >850<1200 N/mm²)
• Stainless free-cutting steel (<250 HB <850 N/mm²)
• Stainless steel - austenitic (<320 HB <1100 N/mm²)
• Stainless steel - ferritic + austenitic + martensitic (<300 HB <1000 N/mm²)
• Nickel alloys (<270 HB >900 N/mm²)
• Aluminium, magnesium unalloyed (<100 HB <350 N/mm²)
• Aluminium alloys - Silicon 0.5% (<150 HB <500 N/mm²)
• Aluminium alloys - Silicon >0.5% <10% (<120 HB <400 N/mm²)
• Aluminium alloys - Silicon >10% whisker-reinforced aluminium alloys, magnesium alloys (<120 HB <400 N/mm²)
• Carbon steel (<250 HB <850 N/mm²)
• Alloy steel (<250 HB <850 N/mm²)
• Alloy steel hardened and tempered (>250<350 HB >850<1200 N/mm²)
• Stainless free-cutting steel (<250 HB <850 N/mm²)
• Stainless steel - austenitic (<320 HB <1100 N/mm²)
• Stainless steel - ferritic + austenitic + martensitic (<300 HB <1000 N/mm²)
• Nickel alloys (<270 HB >900 N/mm²)
• Aluminium, magnesium unalloyed (<100 HB <350 N/mm²)
• Aluminium alloys - Silicon 0.5% (<150 HB <500 N/mm²)
• Aluminium alloys - Silicon >0.5% <10% (<120 HB <400 N/mm²)
• Aluminium alloys - Silicon >10% whisker-reinforced aluminium alloys, magnesium alloys (<120 HB <400 N/mm²)
Teknisk informasjon
Egenskaper
| Gjenger | m6x1,00 |
|---|---|
| Gjengediameter | 6.3 mm |
| Type | metriske blindhull |
| Med kjølespray | nei |
| Gjengeretning | rett |
| Borre diameter | 7.3 mm |
| hale diameter | 6.3 mm |
| Firkantet adapter | 8 mm |
| Gjengedybde | 16 mm |
| Vinkel på helix | 40 ° |
| Overflatebehandling | bright |
| Total lengde | 72 mm |
| Hus materiale | hss |
| Antall gjenger pr. tomme | 25.4 |
| Toleranse | 6h |
| Skafttype | cylindrical shank with square drive |
Vis UNSPSC/ECL@SS
550,71 kr Eks. mva
/ stykk
688,39 kr Inkl. mva
- Tilgjengelig – Leveringsdato på forespørsel