Referanser
Dormer:S93310.0
Rubix:6187764
EAN:7320760040157
Dokumenter
Produktinformasjon : SKAFTFRES SPORFRES 10.00mm SOLID HM TIALN - S93310.0 - DORMER
Micrograin carbide, with high hardness and toughness properties, for excellent wear resistance and long tool life. Flute cutters to cover contouring (semifinishing and finishing), ramping and slotting operations. TiAlN coating results in increased wear resistance and extended tool life compared to uncoated cutters of the same design. Reinforced end teeth to reduce chipping, particularly important on materials with low machinability
DRILL BIT 10.00 3D NORMAL S933 FINITION CW TIAIN
Egenskaper
TiAlN coating
Slotting, ramping, diving mill direction
DORMER mill standard
HM material
Slotting, ramping, diving mill direction
DORMER mill standard
HM material
Bruksområder
• Machining steel soft steel (<120 HB <400 N/mm²)
• Construction steel carburised steel (<200 HB <700 N/mm²)
• Carbon steel (<250 HB <850 N/mm²)
• Alloyed steel (<250 HB <850 N/mm²)
• Alloy steel hardened and tempered steel (>250<350 HB >850<1200 N/mm²)
• Cast Iron lamellar (<150 HB >500 N/mm ²)
• Cast iron lamellar (>150<300 HB >500<1000 N/mm²)
• Ductile cast iron/malleable cast iron (<200 HB <700 N/mm²)
• Ductile cast iron/malleable cast iron (>200<300 HB >700<1000 N/mm²)
• Titanium non-alloyed (<200 HB <700 N/mm²)
• nickel non-alloyed (<200 HB <700 N/mm²)
• Copper (<100 HB <350 N/mm²)
• Béta-Brass Bronze (<200 HB <700 N/mm²)
• Alfa-Brass (<200 HB <700 N/mm²)
• Construction steel carburised steel (<200 HB <700 N/mm²)
• Carbon steel (<250 HB <850 N/mm²)
• Alloyed steel (<250 HB <850 N/mm²)
• Alloy steel hardened and tempered steel (>250<350 HB >850<1200 N/mm²)
• Cast Iron lamellar (<150 HB >500 N/mm ²)
• Cast iron lamellar (>150<300 HB >500<1000 N/mm²)
• Ductile cast iron/malleable cast iron (<200 HB <700 N/mm²)
• Ductile cast iron/malleable cast iron (>200<300 HB >700<1000 N/mm²)
• Titanium non-alloyed (<200 HB <700 N/mm²)
• nickel non-alloyed (<200 HB <700 N/mm²)
• Copper (<100 HB <350 N/mm²)
• Béta-Brass Bronze (<200 HB <700 N/mm²)
• Alfa-Brass (<200 HB <700 N/mm²)
Teknisk informasjon
Egenskaper
| Diameter | 10 mm |
|---|---|
| Type hale | weldon |
| hale diameter | 10 mm |
| Antall tenner | 3 |
| Lengde på kutt | 22 mm |
| Total lengde | 72 mm |
| Senter kutt | yes |
| Skjæremateriale | karbid |
| Overflatebehandling | tialn |
| Type | end mill |
| Vinkel på helix | 30 ° |
| Maskinerings materiale | steel, cast iron, titanium, nickel and copper alloys |
| Kapasitet lengde | 22 mm |
| Kutte vinkel | 30 ° |
Vis UNSPSC/ECL@SS
886,82 kr Eks. mva
/ stykk
1 108,53 kr Inkl. mva
- Tilgjengelig – Leveringsdato på forespørsel